Posted April 4, 20178 yr I bought my bike a few months ago, as soon as I bought it I noticed all of my electronics would shut off then the bike would backfire and then shut off completely. The bike would act like the battery was dead. I replaced the stator and regulator along with all of the plugs and fuel filter and battery. Everything was going good the bike was running very well for a week or so and all of the sudden the same thing began to happen again. In the interest of saving money I did buy an off brand type regulator and stator. Any suggestions on what to do now?
April 4, 20178 yr Moderator 1 hour ago, Cynic said: Thats great. Might be an idea to tell us what bike it is.... R6, its in his side bar
April 5, 20178 yr Moderator 8 hours ago, drewpy said: R6, its in his side bar I use the site from my phone. No sidebar on the mobile site.
April 7, 20178 yr Yeah i have a couple. 1. Post and intro in the new members area 2. Buy or borrow a multimeter (if you don't already have one) 3. Charge the battery and then start the bike. At tickover you should have around 13.5v across the battery terminals, this should increase to around 14v if you increase the revs. Report back your findings when you've done this Sent from my E6553 using Tapatalk
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.