Tdr125greg Posted January 20, 2017 Share Posted January 20, 2017 Good evening all, I'm Greg I have recently purchased a Tdr125 1993 with delta box frame and thought I would sign up to the forum to share the build project. I intend to do a few minor mods Including Trail tech vapour, usd forks,17inch front wheel, better brakes. For the moment though it seems she has never had any of the oil seals replaced and that will be my first thing to do. I've ordered a mitaka piston from PJME with little end bearing and a powervalve service kit, as again the original seals were shot.. Thanks guys and if you like little 125 2strokes watch this space. Link to comment Share on other sites More sharing options...
Tdr125greg Posted January 20, 2017 Author Share Posted January 20, 2017 This evening I've had the end can off and found the was no wadding/packing in there what so ever, I think I will order dep pipes packing (not the loose stuff) and get that replace but for the moment whilst it's off I've given it a clean and a hand Polish, check out the results .https://goo.gl/photos/jUTG9zhSL8yq8iCH7 Link to comment Share on other sites More sharing options...
blackhat250 Posted January 20, 2017 Share Posted January 20, 2017 Hi greg" yeh we like 2Strokes ,, post up your build in the appropriate section ,, 1 Link to comment Share on other sites More sharing options...
Tdr125greg Posted January 21, 2017 Author Share Posted January 21, 2017 14 hours ago, blackhat250 said: Hi greg" yeh we like 2Strokes ,, post up your build in the appropriate section ,, Right-o, let the fun begin 1 Link to comment Share on other sites More sharing options...
Sacha Posted January 29, 2017 Share Posted January 29, 2017 welcome aboard! Link to comment Share on other sites More sharing options...
Recommended Posts