jonny5 Posted December 14, 2016 Share Posted December 14, 2016 Hi peps just posted this in my bike build thread but will get more eyes on the issue here So ive jusy rebuilt my girl after she was stolen The issue im having is my revs keep climbing until she reaches full revs Link to comment Share on other sites More sharing options...
slice Posted December 15, 2016 Share Posted December 15, 2016 Have you checked the carb diaphragm? if that's split then you will get odd running, it's a rubber widget inside the carb, on top of the slide. Link to comment Share on other sites More sharing options...
jonny5 Posted January 1, 2017 Author Share Posted January 1, 2017 Its a sliider carb and doesnt have a diaphram i have notice my bike will roll in gear and rear wheel rolls easy Link to comment Share on other sites More sharing options...
slice Posted January 1, 2017 Share Posted January 1, 2017 Oh sorry didn't know that! Link to comment Share on other sites More sharing options...
jonny5 Posted January 1, 2017 Author Share Posted January 1, 2017 Pmsl no worries bud just this is doing my nut in There is morr infprmation in my project thread Link to comment Share on other sites More sharing options...
Moderator drewpy Posted January 1, 2017 Moderator Share Posted January 1, 2017 weak mix ie too much air to fuel Link to comment Share on other sites More sharing options...
KevtheRev Posted January 2, 2017 Share Posted January 2, 2017 Check your clutch is engaging properly if the bike rolls easily when in gear with the lever out . 2 Link to comment Share on other sites More sharing options...
Recommended Posts