albosh58 Posted July 30, 2016 Share Posted July 30, 2016 How hard or easy is it please to adjust the headstock bearing on ybr125,the steering feels a tad notchy, Thanks in advance,Alan. Link to comment Share on other sites More sharing options...
slice Posted July 30, 2016 Share Posted July 30, 2016 Not hard at all if you have the manual, and if it feels notchy then your best taking it to bit's and finding out if you have duff bearings rather than just tightening it up. Link to comment Share on other sites More sharing options...
Variomatic Posted July 30, 2016 Share Posted July 30, 2016 https://www.amazon.co.uk/Yamaha-YBR125-Service-Haynes-Manuals/dp/0857336215/ref=sr_1_1?ie=UTF8&qid=1469897585&sr=8-1&keywords=YBR+haynes+manual Step one: Buy that manual Step two: Read the relevant section of the manual again and again Both tightening your head stock and replacing the bearings are both easy jobs once you have the manual, that book will show you how to do exactly what you need with step by step instructions, and pictures. 1 Link to comment Share on other sites More sharing options...
albosh58 Posted July 30, 2016 Author Share Posted July 30, 2016 Many thanks to all. Link to comment Share on other sites More sharing options...
slice Posted July 31, 2016 Share Posted July 31, 2016 Just had another think about this Alan, take the head stock apart and see if it might just need re-greasing, might save you time and money if it's only dried out and come loose. Link to comment Share on other sites More sharing options...
albosh58 Posted August 1, 2016 Author Share Posted August 1, 2016 Thankyou,,,ive ordered a workshop manual. Link to comment Share on other sites More sharing options...
Recommended Posts