megapt Posted July 1, 2016 Share Posted July 1, 2016 Hi guys! I recently bought a non running Raptor 660,the primary issue would be the starter clutch that should be no problem to resolve, the secondary issue would be the flywheel that was removed by an idiot and bent the "position sensor thingy" as you will be able to see in the pictures.What I was told was that the engine came from a Tenere (injection model).The problem is I am not being able to find anything on the web remotely close to this flywheel and I am hoping someone knowledgeable will give me some insight on the matter. Link to comment Share on other sites More sharing options...
slice Posted July 1, 2016 Share Posted July 1, 2016 Have you tried here? http://www.tenere.co.uk/forum/index.php They seem to have loads of info on your model. Don't know if any of it will help mind! And WTF have they done to that poor bloody bit of metal? looks like it was removed with a sledge hammer!!!! Link to comment Share on other sites More sharing options...
megapt Posted July 1, 2016 Author Share Posted July 1, 2016 it probably was... Link to comment Share on other sites More sharing options...
slice Posted July 1, 2016 Share Posted July 1, 2016 Also helps if you sign in to the New members section, most folks like you to say Hi in a first post, Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts