Joshmcs Posted May 23, 2016 Share Posted May 23, 2016 Just wanted to write a little introduction for you all. My names josh and last year I purchased my first bike; an xvs 650. I made a large amount of progress and had just begun to hardtail and convert it to single back bone. However unfortunately it burnt down along with all my equipment. So now I have begun the task of rebuilding it from the ashes. My engine is going off for powder blasting this week and I'm going to continue on the frame. Unfortunately a lot of my parts were destroyed or crushed by the rood of the building it was in so I need a little bit of help finding a rear wheel and any information of what other front ends fit. I will post in the proper sections shortly but thought I'd give you all a little over view. Any help would be great! Cheers Link to comment Share on other sites More sharing options...
Sacha Posted May 23, 2016 Share Posted May 23, 2016 Welcome aboard Josh! Bummer about the fire! Start up a project thread (if you haven't already) and we can watch your phoenix rise from the ashes. Link to comment Share on other sites More sharing options...
blackhat250 Posted May 23, 2016 Share Posted May 23, 2016 Great intro josh , bad news wi the fire , Link to comment Share on other sites More sharing options...
meatloaf Posted May 23, 2016 Share Posted May 23, 2016 Greetings, sorry to hear your bad news but sadly sometimes shit happens, good luck on your project Link to comment Share on other sites More sharing options...
Moderator drewpy Posted May 25, 2016 Moderator Share Posted May 25, 2016 On 23/05/2016 at 6:40 PM, Sacha said: Welcome aboard Josh! Bummer about the fire! Start up a project thread (if you haven't already) and we can watch your phoenix rise from the ashes. that's a great name for your project Josh, Phoenix Link to comment Share on other sites More sharing options...
Recommended Posts