simon watson Posted May 9, 2016 Share Posted May 9, 2016 Hi All I am hoping that this forum provide some guidance to a novice? I have purchased a XT250G, pretty much all there and MOT'd etc..., just need to fettle it a bit: Head Gasket, weeping when hot! needs a replacement clock mount, last owner fabricated one not that good It has a stainless steel Micron Exhaust, very good condition, but to be honest I would like an original I have been scouring the internet for the last week and have come up blank on the mounting bracket and exhaust, also would be great to find a digital manual. Looking forward to a fews chats on here and the project moves on :-) Regards Simon Link to comment Share on other sites More sharing options...
Jack R1 Posted May 17, 2016 Share Posted May 17, 2016 As far as a clock mount goes you may struggle. if I were you I'd knock up a template and go to a small fabrication shop Sorry I can't be any more help Link to comment Share on other sites More sharing options...
DutchFJ1200 Posted May 17, 2016 Share Posted May 17, 2016 This 'clockwork' chappy on fleabay seems to have a lot of XT250 gear so looks like he's breaking/broken one. http://www.ebay.co.uk/itm/yamaha-xt250-front-engine-mount-/282030284709?hash=item41aa509fa5:g:PXkAAOSwh-1W3Gms A message to him may help. As for exhaust : tried original 10 years ago and nowhere to be found. Went with a very good stainless jobbie. Link to comment Share on other sites More sharing options...
Tommy10bikes Posted May 18, 2016 Share Posted May 18, 2016 Im not sure but i have a dt or XT clock base its plastic but dont think there are any part number stamps so will need some cross reference checking. XT250 exhaust well the last one i bought came from the states TTB Link to comment Share on other sites More sharing options...
blackhat250 Posted May 18, 2016 Share Posted May 18, 2016 Hi simon , post up a few piccys, Link to comment Share on other sites More sharing options...
Recommended Posts