Moderator Airhead Posted April 15, 2016 Moderator Share Posted April 15, 2016 yes I could see that from the picture mate Link to comment Share on other sites More sharing options...
nayruf Posted April 16, 2016 Share Posted April 16, 2016 Hi As a temporary fix, Could you take out the hinge pin, slide a piece of longer pipe up the centre of the foot rest tube, re shape the end then drill through using the original holes as a guide, replacing the pin to hold them in place, just a thought. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted April 16, 2016 Moderator Share Posted April 16, 2016 you can buy clevis pins on ebay or at a2a4 fixings Link to comment Share on other sites More sharing options...
up.yours Posted April 17, 2016 Author Share Posted April 17, 2016 ta guys, the ones i have on the front are off a ypvs the metal type. the ones on the back could be off anything so there isn't any point converting them , i shall just watch on fleabay for some to crop up. until then i will fit these shit ones on the back and trancefare the back ones to the front. Link to comment Share on other sites More sharing options...
blackhat250 Posted April 17, 2016 Share Posted April 17, 2016 picky"s Kev ? whars the phot"as Link to comment Share on other sites More sharing options...
up.yours Posted April 18, 2016 Author Share Posted April 18, 2016 on my phone john I will have to send them to my laptop then onto here , when I have time, "I'm a busy lad you know" Link to comment Share on other sites More sharing options...
Moderator drewpy Posted April 18, 2016 Moderator Share Posted April 18, 2016 3 Link to comment Share on other sites More sharing options...
blackhat250 Posted April 21, 2016 Share Posted April 21, 2016 P,msellf laughing drewps.... Link to comment Share on other sites More sharing options...
Recommended Posts