KiwiYamaha Posted March 29, 2016 Share Posted March 29, 2016 Hi Guys, im looking at purchasing this 2013 raider. I notice the cable pulleys are exposed behind the passengers right foot peg. Why would this be and should this be like this?! What do they do exactly. link below to see image. The cable is behind the peg and in front to rear tyre. http://postimg.org/image/7q1rjtcup/ Link to comment Share on other sites More sharing options...
KevtheRev Posted March 29, 2016 Share Posted March 29, 2016 I saw that in the first photos but couldn't quite make it out . Does the owner have an explanation ? My guess is the exhaust may have been changed and that these are the cables for an exhaust valve on the original . It's just a guess though , I'm not familiar with these bikes . What are the other end of the cables connected to ? Link to comment Share on other sites More sharing options...
Moderator Cynic Posted March 29, 2016 Moderator Share Posted March 29, 2016 Meatloaf will know. He has one. Same exhausts too. Link to comment Share on other sites More sharing options...
KiwiYamaha Posted March 30, 2016 Author Share Posted March 30, 2016 Awesome, who is meatloaf?! Yeah as he said it was something to do with the exhaust as these are after market. I have the bike booked into the shop 1pm Saturday for pre sales inspection so I'll confirm then also. I'll have them check out all the concerns. Link to comment Share on other sites More sharing options...
Moderator Cynic Posted March 30, 2016 Moderator Share Posted March 30, 2016 One of the forum regulars. Link to comment Share on other sites More sharing options...
meatloaf Posted March 30, 2016 Share Posted March 30, 2016 Sorry guys don't have a clue, there is nothing like that on my bike, when I changed my pipes I just had to remove the o2 senser and fit it to the new pipes. Link to comment Share on other sites More sharing options...
KiwiYamaha Posted April 13, 2016 Author Share Posted April 13, 2016 Hi Guy's, thanks for the assistance. I am still in the process of purchasing. I have finally been approved from the lender and down to a couple of bikes. Regarding this particular raider and these cables i had questions on. I asked the current owner who is selling them. He just replied, "The cables controlled a butterfly valve that prevented backfiriing on the stock pipes that had an opening for the valve, I have found an aftermarket pipes that have a place for the valve" Does this sound plausible? I am not very mechanically minded and as i have never owned a raider to date, i wouldn't know if this is true or not and was hoping you guys might lend advise on his reply. The raider is a 2013 model. James Link to comment Share on other sites More sharing options...
Recommended Posts