Vulture Posted February 25, 2016 Share Posted February 25, 2016 Hi. A couple of pics of the XS250 as I bought it,will add updates as I go along.The third pic is an XS I had back in 1995. 1 Link to comment Share on other sites More sharing options...
Vulture Posted February 25, 2016 Author Share Posted February 25, 2016 Hi so I've stripped the frame,swing arm etc cut off unwanted brackets,weld on a new section for the seat,made a seat Base, mounting brackets for the new alloy mudguards, turned up some new stainless piston for the brakes,made a fork brace,and turned up some new stubs for the new mikuni carbs im fitting. Also I have removed the starter motor to save weight,turned up a bung to blank off the hole. Will add more later Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 25, 2016 Moderator Share Posted February 25, 2016 cool, you seem to be busy. Like that you have a lathe, I'd love one. So whats the plan with the bike? Link to comment Share on other sites More sharing options...
blackhat250 Posted February 25, 2016 Share Posted February 25, 2016 Yeh , good progress, handy that your skilled with the lathe , Link to comment Share on other sites More sharing options...
Vulture Posted February 25, 2016 Author Share Posted February 25, 2016 Hi the bike with be cafe racer type probably not as full on as my Triumph,any how some more pics. im not as good with the camera or the computer as I am with bikes and fabrication so I may goof up with some other pics Link to comment Share on other sites More sharing options...
Recommended Posts