Bonner Posted December 21, 2015 Posted December 21, 2015 Hi everyone I have just bought a1980 dt175 wiring loom for my 1982 dt175 on the 1980 loom all I can see is different is the extra wire out of the magneto and the Cdi unit which is the red wire if I just discard the extra wire will that be ok and if anyone knows anything different would be grateful on their input
Moderator Cynic Posted December 21, 2015 Moderator Posted December 21, 2015 Why discard? You mean disregard and just leave it unconnected. Otherwise yep same ol yamaha. Aint broke etc,etc. 1
Bonner Posted December 21, 2015 Author Posted December 21, 2015 Yes mate just leave out red wire, is that the only difference between the 2 looms, by the way thanks for answering cynic
Moderator Cynic Posted December 22, 2015 Moderator Posted December 22, 2015 Yep, only difference. You might find some tiny variation, the voltage regulator moved (79 to 80 not far though) otherwise yep, same. BTW its not a 1980 loom if its 7 wire, it will be a 78/9 loom.
keithschneider19 Posted February 9, 2016 Posted February 9, 2016 Hi i recently bought a 1981 wiring loom for my 1982 dt125 is this going to be ghe same rule for me? Sent from my SM-G903F using Tapatalk
Moderator Cynic Posted February 9, 2016 Moderator Posted February 9, 2016 Possibly. Some 125 were cdi. Some had points. Without you having done an introduction (HINT) in the new members area. Were guessing. Prob find it will come ready for the 7wire cdi and just use what you need.
Recommended Posts