leightonbike121 Posted December 13, 2015 Share Posted December 13, 2015 hi,high & low beam isnt working on my 09 xt125x,everything else seems ok,including the side light & tail light.i suspect that it may be down to a 5 pin relay located behind the right hand sidepanel,next to the cdi.does anyone know if it could be this relay at fault? (and would it only affect hi/lo beam.) thanks in advance for any advice that is offered. Link to comment Share on other sites More sharing options...
slice Posted December 13, 2015 Share Posted December 13, 2015 K.I.S.S. have you checked the bulb? Link to comment Share on other sites More sharing options...
leightonbike121 Posted December 13, 2015 Author Share Posted December 13, 2015 yes,tested the bulb & its fine. Link to comment Share on other sites More sharing options...
Moderator Cynic Posted December 13, 2015 Moderator Share Posted December 13, 2015 Heard that all too often. Squirt some contact cleaner in all the switches and check your fuses. Doubt its the relay. Could be but in my exp when a relay fails it just stays in one state, ie main or dip beam. Checked the headlight earth? Link to comment Share on other sites More sharing options...
leightonbike121 Posted December 13, 2015 Author Share Posted December 13, 2015 hmm,will re-check the connections but im fairly confident that they are all good,the switchgear is spotless & had a squirt of wd40.it only has one fuse,(i believe) & thats located on the starter solenoid & if that blows nothing will work so i thought id narrowed it down to a relay,or,as you suggested,the earth....which seems more likely,the more i think about it.i think i got to nip out into my workshop & check that right now as the curiosity is getting to me, lol. Link to comment Share on other sites More sharing options...
leightonbike121 Posted December 18, 2015 Author Share Posted December 18, 2015 ok,its not the earth or any of the connections.have bought a relay of ebay,only £8 so hopefully that will cure it. Link to comment Share on other sites More sharing options...
DanBOBBERman Posted January 30, 2020 Share Posted January 30, 2020 did that cure it ? Link to comment Share on other sites More sharing options...
NE0 Posted January 30, 2020 Share Posted January 30, 2020 That post Dan... was back in December 2015 !!! Link to comment Share on other sites More sharing options...
Wirie01 Posted March 10, 2020 Share Posted March 10, 2020 Hi i know that this is an old Post but you never know who will respond right. I have a 2005 xt125x and am looking for parts. Does not matter what parts you have. Link to comment Share on other sites More sharing options...
Recommended Posts