Jump to content

350 f2 hesitation


Nso20
This post is 3365 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hi all

Have just joined so howdy!  

Have an 1990 registered 350 F2 which is lovely and clean, runs well and has just over 19000 miles on.  When under load, it has a slight hesitation from about 5000 to 6000 revs.  When it clears 6000 it really flies!  Just wondering if anyone has any ideas please?  Cheers guys.

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Hi welcome to the YOC, ask your question again in the WORKSHOP section, you will get more replies there.

Link to comment
Share on other sites

Hi nso.   "  sounds like the needle height ,- or needle jets need cleaning,  these are long brass tubes ,with small sparge holes on the sides,

as throttle lifts needles, a regulated amount of fuel is drawn up past the taper of needle. then when throttle is wide open , its main jet that feeds venturi , 

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...