dan28 Posted July 20, 2015 Share Posted July 20, 2015 My 125 dragstar seems to have some plAstic fins on the top of the heads the first few fins appear to be plastic they appear to bolted to a metal bracket above them do they serve a purpose can I unbolt them from the bracket with out disturbing the head Link to comment Share on other sites More sharing options...
slice Posted July 21, 2015 Share Posted July 21, 2015 Have to ask the question, why are you thinking of taking them off? If it's just for the look you want then ok but why did Yamaha add them to the bike in the first place would be my starting point. Link to comment Share on other sites More sharing options...
dan28 Posted July 21, 2015 Author Share Posted July 21, 2015 If I remove the fins I gain over an inch in height ( trying to fit the draggy engine into another bike ) the parts I m talking about look like they are part of the cylinder head but when you touch them they are plastic an have some movement in them they bolt on to a metal bracket they are found under the plastic covers that sit on top of the head Link to comment Share on other sites More sharing options...
slice Posted July 22, 2015 Share Posted July 22, 2015 Oh that makes more sense, thought you were just going for "the look" might be an idea to try it without them and see what happens if no one else has done this before then you can write up how it worked out on here. Link to comment Share on other sites More sharing options...
Noise Posted July 22, 2015 Share Posted July 22, 2015 Can't really remember much about the cosmetic parts of the 125 draggy, im sure it you take them off and there are no internal parts visible then just ditch them if how ever your faced with a hand full of oil and a valve picking you in the eye then id suggest keep them on Link to comment Share on other sites More sharing options...
Recommended Posts