tom9 Posted June 12, 2015 Share Posted June 12, 2015 hi.. i have a yam dt125x supermoto. 2006.. the powerband has stopped working.. ive checked the valve, and it has not siezed and it is free, so the motorised unit has stopped the opening and closing of the valve. would any of you bikers know how to check the motor... i mean is it on a fuse or a relay.. or is it just duff then.. .... please tom............... Link to comment Share on other sites More sharing options...
blackhat250 Posted June 13, 2015 Share Posted June 13, 2015 Hmm " When you switch on ignition, does it whirrrrrr, [ thru cleaning cycle,,] ? Do an intro , in new members, ALSO Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 16, 2015 Moderator Share Posted June 16, 2015 everything you always wanted to know about powerbands http://www.planetash.net/gos/powerbands.html 2 Link to comment Share on other sites More sharing options...
KevtheRev Posted June 17, 2015 Share Posted June 17, 2015 Ha Ha Haaaaa!!! , I'll be ordering two , 'cos my Elsie's a twin ! Link to comment Share on other sites More sharing options...
blackhat250 Posted June 17, 2015 Share Posted June 17, 2015 Typical one hit wonder " posted 6am - looks back in @ 8am, nae answer , so hes off 1 Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 18, 2015 Moderator Share Posted June 18, 2015 Ha Ha Haaaaa!!! , I'll be ordering two , 'cos my Elsie's a twin ! you get two power bands in a packet 1 Link to comment Share on other sites More sharing options...
KevtheRev Posted June 19, 2015 Share Posted June 19, 2015 you get two power bands in a packet Feck !! That's good value . If you put two sets on I'd say you'd have to bungee yourself onto the saddle . 1 Link to comment Share on other sites More sharing options...
Moderator Cynic Posted June 19, 2015 Moderator Share Posted June 19, 2015 you get two power bands in a packet That shows the quality of proper tuning. That initial surge then on to the full power twin band hit at 6k. Need to check your licence though. Prob above A2. Link to comment Share on other sites More sharing options...
Simon46 Posted June 19, 2015 Share Posted June 19, 2015 If the bikes been rebored will I need 1 and a half bands? If I cut the second band slimmer will that be OK? Link to comment Share on other sites More sharing options...
DutchFJ1200 Posted June 19, 2015 Share Posted June 19, 2015 If the bikes been rebored will I need 1 and a half bands? If I cut the second band slimmer will that be OK? Only on Monday's Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 19, 2015 Moderator Share Posted June 19, 2015 If the bikes been rebored will I need 1 and a half bands? If I cut the second band slimmer will that be OK? you normally have to measure the width of the bands to the cc of the bore, that way the power band is resonating at the correct frequency of the engine and ensures longevity as well as power! hope that helps Link to comment Share on other sites More sharing options...
KevtheRev Posted August 5, 2015 Share Posted August 5, 2015 Wow , "Powerband in EVERY gear " . - http://www.gumtree.ie/a-motorbikes-scooters/meath/2003-kawasaki-kx/1001327307600910430471209 Link to comment Share on other sites More sharing options...
Recommended Posts