Hey i was wondering if anybody could help. I recently had an attempted robbery on my bike and i have wired the barrel again which had the wires ripped out. I used different wires to extend how much wire was coming off the barrel and wired it all back up again. It started first time and i was really happy. The next day i tried starting again and it was just turning over and the engine management light was flashing with one long flash and 8 or 9 fast flashes after that. Can anyone help in what i have to do??

my workmate has a FZ1000 and his bike had fault 19 this week, it was the sidestand switch on his

Thanks for the reply. Would you know at all how i would go about fixing this?

check the connections to the switch, try a wuirt of WD40 etc, see if you can get the message to go...don't even know for sure it's the same for your bike but worth a try.

some people would bypass the switch until they get a new one but no way I'm suggesting that you do that, that's your decision alone it could be dangerous if it's bypassed and you forget to lift the stand

Thanks for the info. I will try it out. I wont try and bypass ill just get a new one i think. Cheers mate