Moderator Cynic Posted April 16, 2015 Moderator Share Posted April 16, 2015 Dont be daft. If that key was bad IT WOULD STOP AND STAY STOPPED. If all the wiring is good then it has to be carb. Your going to have to be honest and accurate if were to go further. What is your idea of 'cleaning carbs'? 2 Link to comment Share on other sites More sharing options...
dsb2014 Posted April 16, 2015 Author Share Posted April 16, 2015 I've stripped it jets float valve every thing out and ultra sonic cleaned at my local shop Link to comment Share on other sites More sharing options...
Moderator Airhead Posted April 16, 2015 Moderator Share Posted April 16, 2015 is the connection between the spark plug cap and HT lead a good one or loose? Link to comment Share on other sites More sharing options...
dsb2014 Posted April 16, 2015 Author Share Posted April 16, 2015 Seems good cliqz on and some tension to get it off mate Link to comment Share on other sites More sharing options...
Moderator Airhead Posted April 16, 2015 Moderator Share Posted April 16, 2015 I meant the lead into the cap not the cap onto the plug! Link to comment Share on other sites More sharing options...
dsb2014 Posted April 16, 2015 Author Share Posted April 16, 2015 Ohh yeah mate its on good I've cut a little of the end its sparking good as well I'm stumped!!! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted April 16, 2015 Moderator Share Posted April 16, 2015 this 2002 DTR is a model with a flat slide carb right? Link to comment Share on other sites More sharing options...
dsb2014 Posted April 17, 2015 Author Share Posted April 17, 2015 this 2002 DTR is a model with a flat slide carb right? Yes that's right mate Link to comment Share on other sites More sharing options...
Moderator Airhead Posted April 17, 2015 Moderator Share Posted April 17, 2015 check the fuel filters, there are fiters inside of the tank, you have to remove the fuel cock, and there is a filter in the carb where the pipe attaches to the spigot on the flat slide models Link to comment Share on other sites More sharing options...
Moderator Cynic Posted April 18, 2015 Moderator Share Posted April 18, 2015 Do they have accelerator circuits like my tdr250, sticks some extra juice in when you open the throttle hard to stop the engine balking.. Link to comment Share on other sites More sharing options...
Recommended Posts