April 16, 201510 yr Moderator Dont be daft. If that key was bad IT WOULD STOP AND STAY STOPPED. If all the wiring is good then it has to be carb. Your going to have to be honest and accurate if were to go further. What is your idea of 'cleaning carbs'?
April 16, 201510 yr Author I've stripped it jets float valve every thing out and ultra sonic cleaned at my local shop
April 16, 201510 yr Moderator is the connection between the spark plug cap and HT lead a good one or loose?
April 16, 201510 yr Author Ohh yeah mate its on good I've cut a little of the end its sparking good as well I'm stumped!!!
April 17, 201510 yr Author this 2002 DTR is a model with a flat slide carb right? Yes that's right mate
April 17, 201510 yr Moderator check the fuel filters, there are fiters inside of the tank, you have to remove the fuel cock, and there is a filter in the carb where the pipe attaches to the spigot on the flat slide models
April 18, 201510 yr Moderator Do they have accelerator circuits like my tdr250, sticks some extra juice in when you open the throttle hard to stop the engine balking..
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.