Jump to content

Fuel tap replacement


leefzr6
This post is 3560 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hi all hoping for a little help/advice

.I have an fzr600 1990 (see gallery) the fuel tap on these bikes are prone to snapping.was wondering if there are any direct replacements of the usual metal type.those of you in the know will be aware the fzr has a long plastic one. Thanks for any forth coming help.

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
  • Moderator

there's over 800 pictures in the general gallery and nothing in your personal one.

I'm not spending 1/2 hour looking for a picture

Link to comment
Share on other sites

The taps on these bikes use a black plastic tap that sticks out horizontally about 3 inches (imagine a key fixed to alloy casing) unfortunately this is just under the frame and is usually snapped off when tank is removed.was hoping the more common small alloy type would fit.housing is basically rectangular about 5cm long 43mm between screw holes two filter tubes different lengths (main,reserve).

Link to comment
Share on other sites

×
×
  • Create New...