bippo Posted February 6, 2015 Share Posted February 6, 2015 So then chaps - a 20mm bar riser kit has arrived through the post today. I find on long jaunts the Street Triple puts a little too much pressure on my wrists. I know for a fact that the kit will be simple to install, but I was wondering if someone could help me out? I appreciate how silly that probably sounds but the last thing I want to do is get into a pickle. As a result, I was wondering if anyone who's local to me would be happy for me to swing round and work on this together? I will naturally provide drink or cash as a gesture of thanks! All the necessary parts arrived with the kit and have been reliably informed by others with this installed that cable lengths are adequate to accommodate this increase - so it should be straight-forward. It also came with instructions and I have the original bike manual. The supplier has confirmed that I need a 17mm spanner and 8mm allen key. Sounds easy-peasy doesn't it? Yep! I know... I'm happy to do the work myself, just under guidance from someone who can sense-check my thinking and jump in when something goes tits-up as it usually does when I'm performing my own tasks on the bike. So - give me a shout if you're willing to help a gal out! Thanks, Nina 1 Link to comment Share on other sites More sharing options...
slice Posted February 6, 2015 Share Posted February 6, 2015 Sorry Bipps to far away but would help if I could, someone will be along and help I'm sure. Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 Thanks Slice - for the gesture and also for not ribbing me, ha ha! Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 6, 2015 Moderator Share Posted February 6, 2015 I'm local I live in 'Royston Vasey' Sunday morning? 4 Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 You are local! Sunday morning sounds fantastic Paul - you legend! Are you happy for me to head to yours? Otherwise the work would need to be done on the road at my place (no garden). I'll PM you. Thanks so much! Link to comment Share on other sites More sharing options...
slice Posted February 6, 2015 Share Posted February 6, 2015 Bippo I have NEVER laughed at someone honest enough to say they need help, it's the know it all dummies that I laugh at. Airhead will help you sort it, like all us older riders he likes the fact that youngsters want to get cold and wet while grinning like a maniac cos they are enjoying their ride. 2 Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 Yeah Airhead looks out for me on our annual Squires meet so I'm in good hands Slice! Sunday morning is perfect timing because I'm heading off down south in the evening for work on the bike, so it'll be a good gauge of how well it works. My fender extender also arrived today, but I can fit that myself, so not all that useless!! Link to comment Share on other sites More sharing options...
captf Posted February 6, 2015 Share Posted February 6, 2015 If I wasn't out Sheffield way this weekend, I'd have offered - Sorry, Bippo Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 That's ok Captf! Well if you pass through Glossop and see a Street Triple with blinging high bars and a grinning rider - give me a wave, ha ha! Link to comment Share on other sites More sharing options...
Ttaskmaster Posted February 6, 2015 Share Posted February 6, 2015 You're sometimes around Reading way, aren't you? I'm always happy to help, particularly now that I have an industrial socket set and a 100L compressor!! And if, for some reason, it ends up being beyond us both (not likely for something like a set of pre-approved bar risers), I can call on a good friend and professional motorcycle mechanic, otherwise known as the Plum Patrol!! Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 Cheers Tasky! So kind. You're a cracking bunch on here. I am actually heading down that way on Sunday evening for work (hopefully, thanks to Airhead, with a fitted set of risers). Small world isn't it... Link to comment Share on other sites More sharing options...
blackhat250 Posted February 6, 2015 Share Posted February 6, 2015 Good move " my mate sandy put 40mm risers on his street , cables are fine, remember cover the tank with a towel , as if a spanner etc drops , mind sit on it and adjust you levers after installation, get the angle etc,, you can hold the bars up while paul fits the risers,,handy,,, Link to comment Share on other sites More sharing options...
bippo Posted February 6, 2015 Author Share Posted February 6, 2015 Thanks for the heads up Blackie. Can't wait to fit them, this bike isn't as forgiving as the Tiger! I'll likely be doing another Iron Butt this year, as well as my Scotland trip so I'm purchasing some things that'll make it easier on me. Every little helps! Currently sorting the fender extender, although may have to sand it down a little - clearance doesn't look great. Will see when it's back on the bike Sunday morning. Link to comment Share on other sites More sharing options...
Moderator drewpy Posted February 6, 2015 Moderator Share Posted February 6, 2015 Paul can give me a ring when he gets stuck 4 Link to comment Share on other sites More sharing options...
mcferreira100 Posted February 6, 2015 Share Posted February 6, 2015 I fitted 19mm risers to my VTR and the cables only just made it. Helped quite a bit with the wrists. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 6, 2015 Moderator Share Posted February 6, 2015 Cheers drewpy yeah I'll give you a ring when I get stuck...god knows what we'll talk about though 3 Link to comment Share on other sites More sharing options...
Tommy xs Posted February 6, 2015 Share Posted February 6, 2015 It goes without saying I'd have offered Bipp but in this case Paul's the best man for the job. I hope they ease the pain in your wrist you need to save them for other stuff!! now now I mean working on the bike 4 Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 6, 2015 Moderator Share Posted February 6, 2015 yeah Tommy and working on computers and the like Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 6, 2015 Moderator Share Posted February 6, 2015 how come I cant quote anything ? Link to comment Share on other sites More sharing options...
blackhat250 Posted February 6, 2015 Share Posted February 6, 2015 Me too I thot it was the 8.1 plague Thing is I can quote and post pics on any plus-board forums. Link to comment Share on other sites More sharing options...
Recommended Posts