Jump to content

Featured Replies

Posted

Hi All,

a few months back MY XT started clicking/tapping then cut out, now she woint start. I have checked for compression as i have recently had the piston changed (no compression not an upgrade) and there is nothing wrond there. I have a spark but the engine will not start.

Does anybody have any ideas?

Cheers

Ged

  • Author

Sorry just read that again and it makes less than no sense :eusa_think:

Try again.

I have compression but it will not start.

The Barrel and Piston was changed a few weeks before it died so i know they are fine.

Just before it died it made a tapping/knocking noise, lost all power, then cut out.

  • Moderator

best check the valve timing, it may have slipped? when you re-assembled it did you adjust the timing chain tension properly??

if it did slip then the piston may have had a coming together with one of the valves...hence the tapping / rattling ?

  • Author

I put it in a shop to get done so I assume it was all done correctly. I ran fine for 6 weeks or soo then the tapping started and she died within half a mile

My Suzuki had a similar problem, started to make a ticking noise then a tapping noise then no noise !! Valve stem through the piston, unfortunately sounds like you have a similar problem. Mine was a broken valve spring X2.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...