dave19941 Posted December 4, 2014 Share Posted December 4, 2014 The problems I am having with the motorcycle is its struckling to start and is only firing on one cylinder but I took to a garage and they changed the spark plugs and cleaned the dirt out of the car and ran okay for three days and then it started lagging again what could be the problem Link to comment Share on other sites More sharing options...
Moderator Airhead Posted December 4, 2014 Moderator Share Posted December 4, 2014 The problems I am having with the motorcycle is its struckling to start and is only firing on one cylinder but I took to a garage and they changed the spark plugs and cleaned the dirt out of the car and ran okay for three days and then it started lagging again what could be the problem shit in the car again . . . . . . . well go on then Link to comment Share on other sites More sharing options...
Ttaskmaster Posted December 5, 2014 Share Posted December 5, 2014 The problems I am having with the motorcycle is its struckling to start and is only firing on one cylinder but I took to a garage and they changed the spark plugs and cleaned the dirt out of the car and ran okay for three days and then it started lagging again what could be the problem I think I see the problem... Link to comment Share on other sites More sharing options...
dave19941 Posted December 5, 2014 Author Share Posted December 5, 2014 I ment carb lol 1 Link to comment Share on other sites More sharing options...
dave19941 Posted December 5, 2014 Author Share Posted December 5, 2014 I was typing quick that's all Link to comment Share on other sites More sharing options...
Ttaskmaster Posted December 5, 2014 Share Posted December 5, 2014 It's generally considered good manners, or forum 'Netiquette', to post an intro in the relevant section, before starting on the requests for help... especially when all you have done in this particular case is merely announce that there's an issue with your bike. Think of it as walking into your local biker bar, where no-one knows you, and you just speak that exact same post in a loud voice... The crew here are brilliant, friendly, helpful and knowledgable folk... but also mercilessly sarcastic toward 'One-Post Wonders', who generally come along expecting/demanding free solutions to bike issues and then vanish off without a word of thanks. It happens a lot. This is a social community, so do the social thing - Pop up an intro post in the New Members section, tell us a bit about yourself and you'll find a far friendlier response!! Link to comment Share on other sites More sharing options...
dave19941 Posted December 9, 2014 Author Share Posted December 9, 2014 Okay well I apologise for that but if there is anyone having a problem simular to mine in the future I be happy to help them back as I say a biker always helps another bike I'm sorry if I have upset a few foke on here 2 Link to comment Share on other sites More sharing options...
Ttaskmaster Posted December 9, 2014 Share Posted December 9, 2014 Don't get me wrong - We help in spades... But like most Bikers, such things usually start with "Hello..." Link to comment Share on other sites More sharing options...
neversaydie Posted December 9, 2014 Share Posted December 9, 2014 Could do with a bit more history How long have you had the bike Was it running fine for a period before Is the fuel fresh When was it last serviced etc etc Link to comment Share on other sites More sharing options...
dave19941 Posted December 10, 2014 Author Share Posted December 10, 2014 Well I've had about a month it ran okay for 3 week and then started to get problems but their all sorted expect that it won't start from cold with full coke on Link to comment Share on other sites More sharing options...
dave19941 Posted December 10, 2014 Author Share Posted December 10, 2014 Choke I ment lol Link to comment Share on other sites More sharing options...
dave19941 Posted December 10, 2014 Author Share Posted December 10, 2014 It turns out the there is next to no compression in both cylinders so it's a total engine rebuild Link to comment Share on other sites More sharing options...
dave19941 Posted December 10, 2014 Author Share Posted December 10, 2014 But thanks for all your help guys Link to comment Share on other sites More sharing options...
Moderator Airhead Posted December 10, 2014 Moderator Share Posted December 10, 2014 Ouch! Link to comment Share on other sites More sharing options...
dave19941 Posted December 10, 2014 Author Share Posted December 10, 2014 I know but I love my yamaha even though I have only had it a month 750 pound it's costing do you think that's a good price Link to comment Share on other sites More sharing options...
neversaydie Posted December 10, 2014 Share Posted December 10, 2014 Ouch! Whats the mileage? Second hand engines are rare too Its labour charges that are a killer, can you do it yourself? Link to comment Share on other sites More sharing options...
dave19941 Posted December 11, 2014 Author Share Posted December 11, 2014 20,000 miles but I think the other owner ran it with no oil Link to comment Share on other sites More sharing options...
slice Posted December 11, 2014 Share Posted December 11, 2014 You will save a fortune if you can do it yourself, obviously rebores and such are an outsource item but most of the strip down and rebuild you can do in the garage or even on the side of the road if you have to. How low is your compression compared to the manual measurements? Link to comment Share on other sites More sharing options...
Noise Posted December 12, 2014 Share Posted December 12, 2014 With a bit of luck you may have to just change the piston rings and thats just a top end rebuild, the shit on the stick moment is if the barrels have worn away and you have to try and find replacement oneswhich is not easy nor would i think they are cheap. If you can do it yourself then you will save loads of cash as the lads have said above, just take your time and read the manual word for word and don't rush it. If you need a manual i know someone who has one (wink wink) Link to comment Share on other sites More sharing options...
dave19941 Posted December 13, 2014 Author Share Posted December 13, 2014 Well their rebuilding the whole engine I can do the basics that's all lol Link to comment Share on other sites More sharing options...
Recommended Posts