matttoms Posted September 29, 2014 Share Posted September 29, 2014 I have taken cylinder and piston off to rebored but i have noticed my clutch has become very loose, is this due to the barrel being off and no compression? Or have I got issues with clutch as it was fine before I took the barrel off. Thanks [emoji2] Link to comment Share on other sites More sharing options...
slice Posted September 29, 2014 Share Posted September 29, 2014 Hi, It's usual to do an INTRO in the new members section BEFORE you have a "how do I fix my bike?" question. just so we know your not a one hit wonder, we get a lot of those. So if you would be so kind to nip over there and post a hello we would be much obliged. Welcome to the YOC Link to comment Share on other sites More sharing options...
matttoms Posted September 29, 2014 Author Share Posted September 29, 2014 Just done it my friend Link to comment Share on other sites More sharing options...
blackhat250 Posted September 29, 2014 Share Posted September 29, 2014 Ok , so am thinking the clutch cable has a bracket attached to the barrel or exhaust mounts . no way the barrel affects clutch,, Link to comment Share on other sites More sharing options...
paulmorg Posted September 30, 2014 Share Posted September 30, 2014 it does on one of the barrel nuts Link to comment Share on other sites More sharing options...
matttoms Posted October 6, 2014 Author Share Posted October 6, 2014 All sorted thanks the return spring had broken Link to comment Share on other sites More sharing options...
blackhat250 Posted October 7, 2014 Share Posted October 7, 2014 Result Link to comment Share on other sites More sharing options...
Recommended Posts