mrmetallica Posted June 26, 2014 Share Posted June 26, 2014 im trying to get the shock of my xj900.ive undone the nut but the bolt wont move is it welded to the frame ? cant seem to get the bolt to move . Link to comment Share on other sites More sharing options...
dt502001 Posted June 26, 2014 Share Posted June 26, 2014 No it`s not welded,its rusted spray with penetrating lube and keep tring to rotate it, worse case put nut back on a bit And tap with hammer and a block of hard wood. Link to comment Share on other sites More sharing options...
mrmetallica Posted June 26, 2014 Author Share Posted June 26, 2014 No it`s not welded,its rusted spray with penetrating lube and keep tring to rotate it, worse case put nut back on a bit And tap with hammer and a block of hard wood. ive done all that.there is a type of washer on bolt head side that is bent over on two sides so wont be able to turn the bolt .it just wont move . Link to comment Share on other sites More sharing options...
Moderator drewpy Posted June 28, 2014 Moderator Share Posted June 28, 2014 if the tabs are replaceable, knock them back and turn the bolt to release the rust holding the bolt in Link to comment Share on other sites More sharing options...
mrmetallica Posted June 28, 2014 Author Share Posted June 28, 2014 if the tabs are replaceable, knock them back and turn the bolt to release the rust holding the bolt in it looks like the washer is welded to the frame.will have another look at it Link to comment Share on other sites More sharing options...
Recommended Posts