Aevers14 Posted June 24, 2014 Share Posted June 24, 2014 Hi, i recently replaced part of the exhaust on the rear cylinder and i was wondering if this would have affected how my bike ran. so i cant read spark plugs but im sure one of the boffins out ther can any help would be appreciated. Also as a side not there was a small oil pool around the hole when i removed the plug see pic 1. Pic 1 http://imgur.com/kwsab3l Pic 2 http://imgur.com/GzHNF07 Pic 3 http://imgur.com/Kx8unkI Sorry for linking out but couldnt find a photo sharer that worked on here. Link to comment Share on other sites More sharing options...
Noise Posted June 24, 2014 Share Posted June 24, 2014 Read a spark plug? thats gotta be one shit bed time story or you get really bored when taking a dump Link to comment Share on other sites More sharing options...
slice Posted June 24, 2014 Share Posted June 24, 2014 Ok First things first your plug is fine, about the right colour and not burnt or running to lean, second the "POOL" of oil is not really a pool so much as about normal so forget it, third and most important of all It's polite to say hello first before you ask a "how do I fix my bike " question !! Now I know you didn't know this and your not the first to do it so if you would be so kind as to do an "INTRO" in new members section just to say Hi and let us know your not a one hit wonder that would be appreciated, one other thing this type of question should go into the "workshop" section not the General / Bar section as otherwise it gets difficult to follow who is talking about what and where. So finally Welcome to the YOC and hope you stick around as the more folks on here make it a much better place to be. 1 Link to comment Share on other sites More sharing options...
Noise Posted June 24, 2014 Share Posted June 24, 2014 I was going to say that the Anode looks a bit small tho, either that or the gap is quite wide??? Link to comment Share on other sites More sharing options...
Recommended Posts