dsb2014 Posted March 28, 2014 Share Posted March 28, 2014 as above ve now replaced my needle float valve on my dtr but wen i blow down the fuel inlet theres no air coming through i had the idea that it should have some air coming then wen i lift the floats it will stop ???? Link to comment Share on other sites More sharing options...
Moderator Airhead Posted March 28, 2014 Moderator Share Posted March 28, 2014 sound a reasonable assumption to me mate, can you blow down the spigot with the needle seat removed? Link to comment Share on other sites More sharing options...
blackhat250 Posted March 28, 2014 Share Posted March 28, 2014 Float height Jammed Link to comment Share on other sites More sharing options...
dsb2014 Posted March 28, 2014 Author Share Posted March 28, 2014 i tryed blowing wih out the needle and it passes ok soon as the needles in blocks again. how or can the height be adjusted ???? Link to comment Share on other sites More sharing options...
Moderator drewpy Posted March 28, 2014 Moderator Share Posted March 28, 2014 after market needles are slightly longer than original, so the floats will need adjusting. (via the tang) Link to comment Share on other sites More sharing options...
dsb2014 Posted March 29, 2014 Author Share Posted March 29, 2014 ahh i get u so the tang wants lifting towards me slightly Sent from my GT-S5360 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Recommended Posts