Dazza250 Posted February 18, 2014 Share Posted February 18, 2014 HI , I own a XV virago 250 1993 model , I have starting problems . I can only start the bike in a particular sequence , ignition on , cluch in , put into 1st or 2nd ( Out of neutral ) , lift stand up , back down , back up and it will start . Now ive checked continuity on the kick stand and its ok , and I have checked continuity on the clutch switch and its ok . If I try to start bike when stand is down and in neutral ( Neutral light comes on ) I have no spark . And when I get the bike running putting the stand down will kill the engine , and the other thing to prove the clutch switch is you cannot engage starter motor when in gear and clutch is not in . Does anyone have any ideas .Thanks Link to comment Share on other sites More sharing options...
Moderator Airhead Posted February 18, 2014 Moderator Share Posted February 18, 2014 I'd say that even though the neutral light is working, the signal from the neutral light is detached from the ignition module? Link to comment Share on other sites More sharing options...
Recommended Posts