GoProKid Posted December 30, 2013 Posted December 30, 2013 Hi all, I have just purchased a 2006 Yamaha DT125RE. Its in good condition but the hazard light switch on the left hand side of the bike doesn't work properly and causes the indicators to stop flashing immediately when you switch the hazard button. The indicators do work but I'm sure that the relay is crook. Help?
blackhat250 Posted January 6, 2014 Posted January 6, 2014 Does the relay click when switched " if not then its goosed, watch and learn ,
finnerz89 Posted January 7, 2014 Posted January 7, 2014 Have the indicators been swapped for aftermarket ones? If so you may need an uprated flasher relay. I had this problem when I changed my indicators from 10w bulbs to 21w bulbs, the original relay is only capable of switching 40w in total. Hence your indicators work as normal but not as hazards. The relay from an r6 will plug straight in
Recommended Posts