rob8440 Posted December 24, 2013 Share Posted December 24, 2013 Hi all and merry Christmas. I have a top box and mounting plate from an old bike but the rack won't fit, so I'm looking to fit a rack to my bike, but don't want: a. A huge hunk of metal on the back. b. To spend a fortune. I was thinking of getting some steel/aluminum bars and fix them to the rear passenger handle mounting bolts(I don't carry pillions so don't need the handles), and fix the other end directly to the mounting plate. I'm wanting something minimal, but strong enough to be safe. Before I get shouted at ;-) I have searched this forum and the interweb for 'homemade rack' despite a few interesting rack images (female type) I could find very little. Anyway sorry for rambling on, but basically was wondering if anyone has done this, got pictures, got an engineering degree so I don't end up killing myself or putting the top box through a cage window! Thanks Rob Link to comment Share on other sites More sharing options...
slice Posted December 24, 2013 Share Posted December 24, 2013 Hi Rob, I bought a rack off of a Honda CX500 and cut it in half, extended the frame with 15mil chrome pipe and it fit a treat, you couldn't see the join cos it was under the box, used pop rivets to hold it together and the whole thing cost me £15. I fitted one side first then measured the difference cut the pipe to size and then bolted the other side on and riveted the whole thing back together. it's cheap and you can chuck it away when you don't want it any more, in fact it's still sitting in my garage now (got rid of the Maxim) so if you want that your more than welcome. PM me if you want the rack I will send you some photos if you like. Link to comment Share on other sites More sharing options...
rob8440 Posted December 24, 2013 Author Share Posted December 24, 2013 Cheers slice, PM sent. Regards Rob Link to comment Share on other sites More sharing options...
Recommended Posts