Danie van Niekerk Posted December 18, 2013 Share Posted December 18, 2013 Can someone please assist with plans or ideas to fabricate a hitch for my Dragstar? Link to comment Share on other sites More sharing options...
Ttaskmaster Posted December 18, 2013 Share Posted December 18, 2013 Not so good on the plans, although I could have a go at drawing... But I can do ideas easy enough. Dunno what the SA laws are, but in the UK I believe bikes are limited to trailers no longer than 1m... Try putting a couple of spars on the back end of the frame, at the bottom. Then have them chamfer in behind the rear wheel, to form a point. To this point affix a universal joint, so you can turn it up down left and right (pitch and yaw), but not roll. To the back of this, add a monowheeled trailer frame. If you need further support, a pair of additional spars reaching up toward the top of the frame should do it. You should be able to lug 3-4 kegs of beer on that easy enough - You'll look awesome turning up at the next braai!! Also, run a few Googles for ideas: http://www.mono-trail.co.uk/ http://www.robertawhite.com/piggybacker.htm http://www.hondarebelforum.com/f12/towing-ball-9976.html http://www.svrider.com/forum/showthread.php?t=128943 http://www.customcruiserchrome.com/hitches Link to comment Share on other sites More sharing options...
Recommended Posts