mcnamara1710 Posted December 17, 2013 Posted December 17, 2013 Hi guys pls help.i changed my sprocket and chain today and had to take off my gear shift.after putting it back on can not get any gears what have i done wrong.i have found neutral but my light does not come on.but no other gears pls help what i have to do thanks in advance.yamaha rxs 100 i have.
Moderator Airhead Posted December 17, 2013 Moderator Posted December 17, 2013 you only took off the gear lever...nothing else?
mcnamara1710 Posted December 17, 2013 Author Posted December 17, 2013 Hi airhead.yes gear leverand the seround case by stator.also case where my clutch cable goes into to get to the varator nut.
Moderator Airhead Posted December 17, 2013 Moderator Posted December 17, 2013 what's a verator nut? cant think why you cannot select gears though, what none at all?
mcnamara1710 Posted December 17, 2013 Author Posted December 17, 2013 I took everything off to expose the nut to take off.the nut that keeps the front sproket on.when i put it all back and the gear lever nothing,my bike was stuck in gear and could not shift up or down.
Moderator Airhead Posted December 18, 2013 Moderator Posted December 18, 2013 I took everything off to expose the nut to take off.the nut that keeps the front sproket on.when i put it all back and the gear lever nothing,my bike was stuck in gear and could not shift up or down. you have to rock it back and forth to be able to change gears...are you doing this?
mcnamara1710 Posted December 18, 2013 Author Posted December 18, 2013 I've not done that airhead,at the monent it is in neutral.so i will put gear shift back on select 1st gear if i can.if not rock back and forth.will this inline my gears back to normal 1 down 4 up.thanks
Moderator Airhead Posted December 18, 2013 Moderator Posted December 18, 2013 it is not possible to select gears when the engine is stopped without rocking the bike back and forth
mcnamara1710 Posted December 18, 2013 Author Posted December 18, 2013 Ok airhead thanks.I'm in work at the mo will try when i get home then.will let you know how i get on.
Dt rich Posted December 18, 2013 Posted December 18, 2013 Mayb you did not put your gear lever in in original place mayb I had a old pit bike years ago that I done it to and would not go in gear till I got it back in the proper place
mcnamara1710 Posted December 18, 2013 Author Posted December 18, 2013 Dr rich maybe it could be that,how did you get over that.put it on and check,and if not take off and move slightly and so on was it.
mcnamara1710 Posted December 18, 2013 Author Posted December 18, 2013 Dr rich maybe it could be that,how did you get over that.put it on and check,and if not take off and move slightly and so on was it.
Moderator Airhead Posted December 18, 2013 Moderator Posted December 18, 2013 just make sure the lever doent hit the frame or the engine casing when you move it
Dt rich Posted December 18, 2013 Posted December 18, 2013 Dr rich maybe it could be that,how did you get over that.put it on and check,and if not take off and move slightly and so on was it. Yep that's how I done it don't take to long next time get a tipex pen and mark it so u no where it lines up if it is that
mcnamara1710 Posted December 18, 2013 Author Posted December 18, 2013 Airhead and dt rich.thanks for your help,i did what you said rich took 3 attemps but all sorted now thankyou.
neversaydie Posted December 18, 2013 Posted December 18, 2013 Normally there is a mark on the splined shaft that needs to line up with the split in the lever Ride it for a couple of days, if its still good, then mark the end of the shaft with a centre pop, where it lines up with the split. That wont wash off
Dt rich Posted December 18, 2013 Posted December 18, 2013 Airhead and dt rich.thanks for your help,i did what you said rich took 3 attemps but all sorted now thankyou. Good glad you sorted it
Recommended Posts