Jump to content

Yamaha dtr earthed wire in the speedo HELP needed please


Lewisarron0808
This post is 4158 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hello people

I was told by a person on YouTube that if you earthed a wire behind the speedo your top end speed will be faster and I wanted to try it out, so had a look and there is a few wires there but didn't know what one it was so if anyone knows what wire I should be looking for could you help me out please

Cheers

Lewis

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Dose it's matter what year it is mate as I have the new shape and ant got a rev clock

Cheers

I don't know much about the DT's but it does say *100% certain on 2004 + models* so i would think it will work. Good luck!

Link to comment
Share on other sites

Yeah you should be fine, just go for it anyway!

Link to comment
Share on other sites

There's a four pin connecting block with four wires going in and only three coming out, the one that doesn't go to anything should be black with a green line down it, clip this wire off and connect it to the frame

Link to comment
Share on other sites

The connector block is behind the speedo, grouped with a load of other cables in a rubber boot.

You'll have to remove the front headlight and cowl to get to them.

Link to comment
Share on other sites

As long as it's a nice clean connection it shouldn't matter.

Radiator mounting bolt is ok, or if you're good with a soldering iron you could connect it to your headlamp earth.

Basically anything that leads back to the neutral on the battery=earth

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...