sniff6 Posted December 21, 2013 Share Posted December 21, 2013 Why do you want more power out of a 125 ??? Why not save your money until you pass your test and get a bigger bike ??? Dont take offence i think what you are doing is great work but well you know.... Link to comment Share on other sites More sharing options...
Calum122 Posted December 22, 2013 Author Share Posted December 22, 2013 Passed my test mate thanks haha. But nah it's not about power. It's about delivery. I don't even want that much power. I'm just doing it because i can. It's good fun and it will be i teresting to see what you can get out of it. I'm aiming for low 20 to 25bhp. More than that and it just won't be any good for everyday use. My intentions are to have it dyno'd at the end. Link to comment Share on other sites More sharing options...
sniff6 Posted December 22, 2013 Share Posted December 22, 2013 Excellent you carry on mate. Link to comment Share on other sites More sharing options...
dt502001 Posted December 22, 2013 Share Posted December 22, 2013 Watching quitely just so you know,but after you get the porting done get some measurements and good picts. Link to comment Share on other sites More sharing options...
Calum122 Posted December 22, 2013 Author Share Posted December 22, 2013 Good pictures definitely. Measurements possibly. Not sure how i'd go about accurate readings. I've only got verniers. Link to comment Share on other sites More sharing options...
dt502001 Posted December 22, 2013 Share Posted December 22, 2013 Lots of different ways to copy it IE...Tape paper inside the bore mark top and bottom of the ports bottom of barrel top of barrel. And trace or blue die( blue die the barrel and press paper to it the die will only stick to the bore not the ports) the shape this way you can duplicate it later if needed No doubt they will be altering the port height width ect and I trust you using a reptibule sorce for this work so learn from them Link to comment Share on other sites More sharing options...
dt502001 Posted December 22, 2013 Share Posted December 22, 2013 Making a plaster plug to get the port shape is also a good way to be able to measure it. Link to comment Share on other sites More sharing options...
Calum122 Posted December 23, 2013 Author Share Posted December 23, 2013 This will probably be the last post I make on this this yeah. Awaiting parts now. New tab washers. New clutch and springs. Carbon reeds. All of which i'd expect in the new year. I've also dropped my old cylinder off at skellerns yamaha for a hone and new piston. No need for rebore which is good bstill original bore too! 20k miles So here's the last of it. Been assembling the primary drive gears and clutch assembly. Also added the kickstart to the tzr. Enjoy. This took me a while to figure out. Just persistence in the end got me there. Be interested to see whether this works or not. Link to comment Share on other sites More sharing options...
Calum122 Posted December 27, 2013 Author Share Posted December 27, 2013 Just a little video of the bike BEFORE I fit the Zeeltronic. So you get an idea of how slow it is. 1 Link to comment Share on other sites More sharing options...
georgen Posted December 27, 2013 Share Posted December 27, 2013 At least I didn't see the peddle bikes come back past mate LOL, It doesn't seem bad, will be good to get vid after to compare difference. Link to comment Share on other sites More sharing options...
Calum122 Posted December 27, 2013 Author Share Posted December 27, 2013 Haha! Yeah that wouldn't be the first that had happened to me either! I had that on my Aprilia rs50. Overtaken by a pushbike lmao! Link to comment Share on other sites More sharing options...
Calum122 Posted January 11, 2014 Author Share Posted January 11, 2014 Bottom end is complete! http://i1152.photobucket.com/albums/p488/calum122/DT125/DT125%20Project%20Thread/B93B1F88-DA70-48CC-B021-87B7479C4F9E_zpsz4dnfnbm.jpg http://i1152.photobucket.com/albums/p488/calum122/DT125/DT125%20Project%20Thread/80BCF6E1-B5CA-4C72-9DC1-883AE3DE7FA8_zpsac716mw0.jpg Link to comment Share on other sites More sharing options...
Calum122 Posted January 11, 2014 Author Share Posted January 11, 2014 Link to comment Share on other sites More sharing options...
Calum122 Posted January 11, 2014 Author Share Posted January 11, 2014 Link to comment Share on other sites More sharing options...
georgen Posted January 11, 2014 Share Posted January 11, 2014 Top job Calum, hope it runs Only pulling your leg mate sure it will be sweet as. Link to comment Share on other sites More sharing options...
Calum122 Posted January 11, 2014 Author Share Posted January 11, 2014 You and me both. I've never done it before nor do i have much prior experience with this sort of thing. Link to comment Share on other sites More sharing options...
Calum122 Posted January 13, 2014 Author Share Posted January 13, 2014 Still no Zeeltronic. It was faulty so had to send it back. But sorted exhaut out now should sound better, https://www.youtube.com/watch?v=yD8uN6ADdb4&feature=youtu.be Link to comment Share on other sites More sharing options...
Calum122 Posted January 13, 2014 Author Share Posted January 13, 2014 Link to comment Share on other sites More sharing options...
georgen Posted January 13, 2014 Share Posted January 13, 2014 sounds more crisp Calum, Link to comment Share on other sites More sharing options...
Bioshock Posted January 13, 2014 Share Posted January 13, 2014 Proper job fella. Love what your doing with this. Link to comment Share on other sites More sharing options...
Recommended Posts