May 14, 201312 yr that does sound like its going to be a lot simpler than you first imagined, good luck ken, hope its something easy to fix.
May 20, 201312 yr Author Well had the carb off with reeds in place I've pushed the kick start down repeatedly and noticed the reeds don't open 1 bit and there covered in petrol. I belive Rings have worn, piston top is black as to be expected but there is only what I can describe as burning to a small part of the edge of piston on exhaust port side. No loose bits of metal or anything! Must admit the piston and rings I bought where cheap. I've snapped my 12mil spanner so couldn't take the cylinder off but I rubbed my finger around in there and couldn't feel any scratches etc.... Ken
May 25, 201312 yr What you thinking then? New reeds and rebuild the top end? Doesn't sound too bad! Paul
May 25, 201312 yr Author Rings had snapped its not in best of shape and I think the bottom end needs stripping Gutted Ken
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.