ktm301p Posted April 7, 2013 Share Posted April 7, 2013 Hi everyone, The bike is failing to start after being sat for a long time. Spark plugs have been replaced but am now thinking that the carb has gunked up. I don't have a great amount of experience with working on bikes, so would greatly appreciate some advice on how to remove the carb. If you follow this link, I've taken pictures of the manual which shows you which bits to take off matched with the parts it is on my bike. I wasn't 100% sure if the parts I'd found on the bike matches those on the manual. http://s1337.photobucket.com/user/alex_evans1/library/?page=1 If you guys could take a quick look at the pictures to see if I've matched them up okay that would be great, also a general guide if anyone knows it would be awesome too. Thanks Alex Link to comment Share on other sites More sharing options...
dt502001 Posted April 8, 2013 Share Posted April 8, 2013 Couldn't make heads or tail of what you were asking Link to comment Share on other sites More sharing options...
Recommended Posts