Posted March 30, 201312 yr Hi Guys, My XV125 requires me to choke when starting...this is not a necessity with my other xv125, and was not the case with the subject xv125 earlier.. Once started, I can rev only at high RPM, At low RPM engine gets low and low till it stops.. But when engine goes to stop if I pull the choke it revs up again... There's no air leak at carb joint, am sure about it... As everybody suggested I set Idle screw , doesnt seem to alter the situation.. Am wondering someone , may be at the garaj, someone has toyed with the mixture screw? The reason why I think so is, when engine goes to die at idle irrespective of my acceleration if I pull choke engine revs again, I can rev engine with choke jst like I would with accelerator... Please read carefully and help me solve this...sounds like carb is bad..? Thank u all!
March 30, 201312 yr Author Really?? Buddy I cleaned the whole carb with ABRO carb and choke cleaner....right after cleaning even this stayed same... Please highlight the areas I should look into..thanks
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.