April 2, 201311 yr Bloody hell Grouch.. you're better off stripping the whole bike down and rebuilding it from scratch!
April 2, 201311 yr Author Bloody hell Grouch.. you're better off stripping the whole bike down and rebuilding it from scratch! I more or less have now, after this the bike should be fine.
April 2, 201311 yr Moderator Cables are a Piece of Cake to replace Grouch ...... be sure to lube it with Silicone spray bewfore installing, makes 'em last alot longer
April 2, 201311 yr Author Cables are a Piece of Cake to replace Grouch ...... be sure to lube it with Silicone spray bewfore installing, makes 'em last alot longer Haven't got any, I'm going to pour a little bit of oil down the sleeve.
April 2, 201311 yr Haven't got any, I'm going to pour a little bit of oil down the sleeve. Be careful with that oil can - if the cable is lined with nylon/teflon or similar you could feck it up as the lining can swell in reaction to the lube.
April 2, 201311 yr Author I'll put it on and see how it feels, it should be ok until I can get some proper lube.
April 2, 201311 yr Be careful with that oil can - if the cable is lined with nylon/teflon or similar you could feck it up as the lining can swell in reaction to the lube. Pete " he won"T sleep tonight now.....
April 2, 201311 yr LOL how long does it take to put on a cable 20 min or so,quit dicking around and just put the dam thing on,at the rate your breaking them by holding it wfo,it won't last long enough to need lubeing.
April 2, 201311 yr Author LOL how long does it take to put on a cable 20 min or so,quit dicking around and just put the dam thing on,at the rate your breaking them by holding it wfo,it won't last long enough to need lubeing. I've only snapped 1
April 3, 201311 yr I've only snapped 1 LOL so far,get it on yet? With all the repaires I lost track and though the last one lasted a week
April 3, 201311 yr Author Ultimate fucking failure, three bolts were threaded/seized and were impossible to unscrew. I have snapped my plastics (in temper) to get them off, then when I got to the final bolt on the tank it was totally rounded and seized through rust. So I phoned the garage £25 to fit so fuck it it's getting done tomorrow. I really don't give a fuck about £25 it really stressed me out and there was no way I could get the bolts out. I should of just phoned the garage in the first place. So now my plastics are snapped.
April 3, 201311 yr Bloody hell Grouch!!! What are you like? told you "SEE NICE MAN AT GARAGE" We have a new word now for anything that's broken or f***ed it's called "GROUCHED" PS just so you don't feel to bad mine failed the MOT yesterday, front wheel bearings were "GROUCHED"
April 3, 201311 yr Moderator never mind grouch, its all part of the learning curve, or in your case learning cliff even the rest of my family are following your escapades and they don't like motorbikes!
April 3, 201311 yr Author never mind grouch, its all part of the learning curve, or in your case learning cliff even the rest of my family are following your escapades and they don't like motorbikes! Haha glad some people are enjoying my misery
April 3, 201311 yr Holy duck you have no luck with fixin things,might be best for you to just let someone else do it for you,untill you can get someone to show you how to do things.Hope the broken plastic dosn't cost much to fix,what did you break? A impact driver would have made short work of the seized bolts.http://en.wikipedia.org/wiki/Impact_driver O well you have given us a new way of sayin things "GROUCHED"and have a good sence of hummor.
April 3, 201311 yr Author After this surely nothing else can go wrong. At least I gave it a go, the shit thing is I could of done it
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.