Preload Posted March 15, 2013 Posted March 15, 2013 Does anyone know if the clock dampers on the XS 250,360,400 etc will fit an 400C. If so i'm after some.
Moderator drewpy Posted March 16, 2013 Moderator Posted March 16, 2013 yep, the SOHC are all interchangeable with very little design change. the custom variants have longer forks and 16" wheel with a longer swing arm. Have you got the dampers yet?
Preload Posted March 17, 2013 Author Posted March 17, 2013 No they arnt available for RD400 but seam to about for the XS range.
Moderator drewpy Posted March 17, 2013 Moderator Posted March 17, 2013 do its an rd 400c not an xs400c? didn't make that very clear tried HVC cycle?
Preload Posted March 18, 2013 Author Posted March 18, 2013 Didnt post RD in the first post did I my apologies Drewpy.
Moderator drewpy Posted March 18, 2013 Moderator Posted March 18, 2013 Didnt post RD in the first post did I my apologies Drewpy. OK, may still work for you. If you can measure your clocks I can measure mine (that's CLOCKS, not Cocks)
Preload Posted March 19, 2013 Author Posted March 19, 2013 I think the clock are the same diameter just the rev range on the tacho maybe different.
Moderator drewpy Posted March 19, 2013 Moderator Posted March 19, 2013 I think the clock are the same diameter just the rev range on the tacho maybe different. my xs400 starts to red line at 9.25k if that helps
Preload Posted March 19, 2013 Author Posted March 19, 2013 my xs400 starts to red line at 9.25k if that helps Only if it effects the rubber dampers.
Moderator drewpy Posted March 19, 2013 Moderator Posted March 19, 2013 Only if it effects the rubber dampers. it might do!
Recommended Posts