Posted February 14, 201312 yr Hey ya'll. Been a while. I'm planning on fitting bar risers to the divvy, probably only 20mm as my back ain't that shot, yet. Next bike will be bigger! Will I have enough cable and hose play or will I need longer of each? Ta!
February 14, 201312 yr Aye trumpey" before you buy them , check cables / hoses for slack,,, i did my iliminator last year,,30mm .. was tight ish,, they had a back angle[ rizers] fouled opening fuel cap, unless bars were straight ahead, , so thers more than cables to watch for,,
February 15, 201312 yr Author Noted and thanks! Thankfully, the bars get nowhere near the fuel cap area.Anything to watch out for in terms of type or quality of risers?
February 26, 201312 yr Author Tight risers bought, I thought I had plenty of play but it looks as though I'm going to have to do some rerouting. Lucky with the bike being naked and no fairing to snag but has anyone and experience of rerouting brake hoses etc? Anything to watch out for apart from the usual snagging etc?
February 26, 201312 yr On 2/26/2013 at 10:23 AM, trumpetdude said: Tight risers bought, I thought I had plenty of play but it looks as though I'm going to have to do some rerouting. Lucky with the bike being naked and no fairing to snag but has anyone and experience of rerouting brake hoses etc? Anything to watch out for apart from the usual snagging etc? Check on full lock that none of the cables are scisscored by the lock stops
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.