dirtlover2005 Posted November 4, 2012 Share Posted November 4, 2012 Hi guys - I hope you can point me in the right direction. My wife is learning to ride so we picked up an 06 YBR 125 to practice on. It has been great but yesterday we went out and the bike just died. we pulled into a garage to fill with fuel and the bike would not start again. Checked fuel was going to the carb ok so pulled the plug (which looks good) but there was no spark when cranked over. The fuse looks good too. I'm thinking maybe the coil but not sure how to check with the multimeter? Any help would be much appreciated. DL Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 4, 2012 Moderator Share Posted November 4, 2012 Have to ask the obvious first Have you knocked the killswitch ? Link to comment Share on other sites More sharing options...
dirtlover2005 Posted November 5, 2012 Author Share Posted November 5, 2012 Hi Airhead - there is no kill switch on it. I did look Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 5, 2012 Moderator Share Posted November 5, 2012 You sure there isnt a big red switch on the RH control? Link to comment Share on other sites More sharing options...
Moderator Airhead Posted November 5, 2012 Moderator Share Posted November 5, 2012 Just had a look in the owners manual and I see you are correct, thats the first (modern) bike I've seen without a kill switch! If you havent got this manual It's fee to download here http://www.ymenvom.nl/new/manuals/U3D9E0.PDF Link to comment Share on other sites More sharing options...
Recommended Posts