fatlad74 Posted November 1, 2012 Share Posted November 1, 2012 Hi peeps, the starter clutch has gone on my bike and i am trying to use a puller to get the rotor off but it wont come off. any suggestions would be greatly appreciated. Thanks Link to comment Share on other sites More sharing options...
dt502001 Posted November 1, 2012 Share Posted November 1, 2012 Only thing i can sugest is to tighten up the puller and give it a sharp blow with a hammer,not the rotor but the puller Link to comment Share on other sites More sharing options...
neversaydie Posted November 2, 2012 Share Posted November 2, 2012 As above, sharp tap on the end of the jacking screw while the screw is tight. Could try a little gentle heat from a hair dryer to assist with breaking the join Link to comment Share on other sites More sharing options...
Recommended Posts