anthony robinson Posted October 27, 2012 Share Posted October 27, 2012 just got one of these and was wondering if a xj600 pre diversion motad exhaust would fit without too much modification? Link to comment Share on other sites More sharing options...
slice Posted October 27, 2012 Share Posted October 27, 2012 Hi Anthony, I have the same bike and I think that the 600 exhaust is slightly different in the down pipes, if you check the numbers on the original pipes (at the end that goes into the 4 way connector) you will see that the numbers are different and that the pipes on the 600 are slightly shorter than the original, so you might be able to use the 600 tail pipe and leave the original down pipes on. Hope that helps. Link to comment Share on other sites More sharing options...
anthony robinson Posted October 27, 2012 Author Share Posted October 27, 2012 hi, thanks for that, the bike i have has no exhaust at all so i was going to risk buying a xj600 motad 4-1, but if its pipes are shorter then you have saved me a big headache, thanks again Link to comment Share on other sites More sharing options...
Recommended Posts