October 14, 201212 yr Author em, i havent cheanged piston since i bought my bike, and i dont know how long it was driven by privoust owner ! ... Piston ca be problem?
October 18, 201212 yr Author I have new problem, i think thats a problem ... okey, so here are in pics : This i found when i was looking where are starter, because my moto isnt start on electronic starter - it sounds like this - "tik" (after i push button) ... and else happens ...
October 18, 201212 yr Author Thats normal, is thak kind of leakage system? or i can taping it with liquid metal ?
October 18, 201212 yr Author Yep, i know its wrong, but ... just looking aroud ... em ... tomorow will clean carb.
October 20, 201212 yr Moderator Can you do a compression test? What size main jet is fitted in the carb?
October 21, 201212 yr Author I don't know how to do that. I cant take out float, so i dont know size of jet.
October 21, 201212 yr Moderator so you hav not cleaned the carb then...I thought you had done that? are you saying you havent had the float bowl off?
October 21, 201212 yr Author I clean it ... without taking float off, with Carb cleaner spray ... i cleaned all the holes. A cant get it out, in tutorial what i wachet - bowl comed out easy, but in my carb i tryed all, but no sucess ... it stays in it place, no move.
October 21, 201212 yr Moderator Cleaning the carb really means cleaning the inside...the jets and passages inside of the carb. It is always difficult to undo the bowl screws, you need a perfectly good fitting screwdriver...one slip and the screw is chewed up and you will have to resort to other means, There is nothing to say that ANY of this will answer you original question though...the carb might be perfectly clean...your bike will still do 90kph and you may well feel that you have wasted your time.
_33963e.png)
_83bc35.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.