afsar Posted September 26, 2012 Posted September 26, 2012 Folks, what all is needed for chain and sprocket replacement? Do I need any special tool for this job? Any DIY thread etc?
dt502001 Posted September 26, 2012 Posted September 26, 2012 Nothing rocket science about it just remove the nut on the front sprocket before you remove the chain,this way you can use the rear brake to keep it from rotating.There is a lock tab you will have to bend back to remove the nut. As far as tools just a big enought socket and a long breaker bar or a impact driver.
Grouch Posted September 26, 2012 Posted September 26, 2012 Also make sure you give it plenty of lube.
Moderator Airhead Posted September 26, 2012 Moderator Posted September 26, 2012 is there a split link in the chain?
afsar Posted September 27, 2012 Author Posted September 27, 2012 I don't know at the moment if there is a split link, can't see in my current one it is too dirty. Is it like I have to break my current chain to finally remove it? I have all common sort of extn bar and sockets.
dt502001 Posted September 27, 2012 Posted September 27, 2012 If it's the orignal chain there is no split link,just take a grinder to it and cut it, the new chain will have a split link in the box.
afsar Posted September 28, 2012 Author Posted September 28, 2012 How do I unlink the new chain to fit it in and also do I need to take off the wheel for changing chain if it is link attached
Recommended Posts