Migthy Mule Posted July 12, 2012 Share Posted July 12, 2012 Hi all, my engine has been at the shop for about 2 months now (really crap service) think he has had some staff issues anyhow the problem now is that it is bored out to .75 over and it appears they have now discontinued this size, I was hoping to avoid a re bore but unless anyone knows where I can find one this seems my only option to go up to 1mm oversize, I have trawled ebay and spoke to yambits so before I go down the re bore route I thought id see if any of you knowledgeable lot could help out, Thanks Link to comment Share on other sites More sharing options...
Moderator Cynic Posted July 12, 2012 Moderator Share Posted July 12, 2012 Give these guys a ring, they restore TY's. The175's use the same engine and as such pistons. Good guys, they don't like pattern parts so it may be a sitting down job, don't expect 20 quid. But they know their stuff. http://www.tytrials.co.uk/ Link to comment Share on other sites More sharing options...
Moderator Airhead Posted July 12, 2012 Moderator Share Posted July 12, 2012 Here MM? very hard to find now!! cmsnl are asking more than 200 euros http://www.gearhead....7-11637-00-00/1 http://www.boats.net...1637-00-00.html http://www.partspak....dproduct=219442 Link to comment Share on other sites More sharing options...
Migthy Mule Posted July 12, 2012 Author Share Posted July 12, 2012 Thanks folks, don't mean to sound ungrateful but I dont really want to wait 3 more weeks for the piston to arrive from America and at that price it would be cheaper to bet it bored out to 1mm, ill phone ty trials tomorrow, they look promising and I was thinking of getting some progressive fork springs - looks like they may be able to help with that to, cheers to you both. Link to comment Share on other sites More sharing options...
Recommended Posts