jbhome Posted July 1, 2012 Share Posted July 1, 2012 Hello all, just bought a 79 DT1 with 9000k. Started first kick and ran strong but... Shades of my CT1. Both would stall for no apparent reason. After half an hour of kicking it would star and run fine till the next time. The DT1 doesn't start. Little or no spark so now the research begins. It looks/felt good while it was running so should be fun. Any suggestions gratefully accepted. It's getting fuel. Battery is 6V. Kill switch is working both on and off. From the schematic, it seems the ignition switch also acts like a kill switch so I believe that part is working. When I put a meter on the (points) side I know there are no points, its just to I'd the wire, and kick, I get a pulse out of this wire. Does anyone know/have more details on the CDI circuit? Have a great ride, Jim Brooks Link to comment Share on other sites More sharing options...
Moderator Airhead Posted July 1, 2012 Moderator Share Posted July 1, 2012 Greetings Jim Please leave this one just for the intro or you'll have two threads running at the same time Link to comment Share on other sites More sharing options...
Sacha Posted July 3, 2012 Share Posted July 3, 2012 Welcome to the YOC Jim. Hope you get the issues sorted. Link to comment Share on other sites More sharing options...
Recommended Posts