Chunk61 Posted April 25, 2012 Share Posted April 25, 2012 I'm having trouble getting me brakes to bleed correctly. New master cylinder. They won't build up pressure. No apparent leaks. suggestions??? Link to comment Share on other sites More sharing options...
yambam52 Posted September 10, 2012 Share Posted September 10, 2012 hi,i have just looked at youtube,and there are no specific videos on the thundercat,but there are a number on bleeding brakes on different bikes,and these should help you ,if you still have this problem.sounds like an air lock,to me,especially since their are no leaks.the various techniques should help you sort out your bike.good luck,yambam52. Link to comment Share on other sites More sharing options...
Moderator Cynic Posted September 10, 2012 Moderator Share Posted September 10, 2012 hi,i have just looked at youtube,and there are no specific videos on the thundercat,but there are a number on bleeding brakes on different bikes,and these should help you ,if you still have this problem.sounds like an air lock,to me,especially since their are no leaks.the various techniques should help you sort out your bike.good luck,yambam52. Pop over to the new members area and introduce youself properly. A lot of posts get passed over like the one above simply for a lack of introduction. There are plenty of folk need help of all kinds. Some just want a bit of banter. Its a common sight. No please, thank you or second post. Nobody wants that. Link to comment Share on other sites More sharing options...
up.yours Posted September 10, 2012 Share Posted September 10, 2012 at least you jumped in with help rather than ," my bike won't start ,why/". welcome to the madhouse yambam. also this is an oldish post ,he's probley sorted it by now. Link to comment Share on other sites More sharing options...
Recommended Posts