inlet manifold

[spurs59]

has anyone done the above to there dtr sm.

what gains did you get

[spurs59]

i take it no one has done this mod then?

[Airhead]

I did, it didnt go any slower, but probably no faster either...the thing is I did a few things all at the same time so how each individual change worked out was a bit lost! I must say though I prefer the way I did it to the usual one proffered by others

[spurs59]

I did, it didnt go any slower, but probably no faster either...the thing is I did a few things all at the same time so how each individual change worked out was a bit lost! I must say though I prefer the way I did it to the usual one proffered by others

what way did you do it?

[Teflon-Mike]

Personaly I'm a bit lost.

'Any-one done the above'... and above is the words 'inlet manifold'?

Is there a picture missing?

What's the question?

[NEV]

Aye Spurs, reckon you need to ellaborate on that type of mod mate, as mines pretty much been modded to the hilt, and the air intake manifold is a new one on me, unless you mean making it fit a bigger carb, like say a 34mm Mikuni, from a standard 26-28mm one? the only thing I've done to mine concerning that area is to take off the snorkel, so as to lean off mine slightly as it was running a tad rich.

[spurs59]

Aye Spurs, reckon you need to ellaborate on that type of mod mate, as mines pretty much been modded to the hilt, and the air intake manifold is a new one on me, unless you mean making it fit a bigger carb, like say a 34mm Mikuni, from a standard 26-28mm one? the only thing I've done to mine concerning that area is to take off the snorkel, so as to lean off mine slightly as it was running a tad rich.

click here

scroll down on link to find it.

[NEV]

Ah you mean that modification, well the few people who I know to have done it with their DT's have noticed little, if any difference to their bikes, so I left mine alone, although I did change the reed petals from fibre glass ones to carbon fibre, and noticed there was an added "crispness" to the throttle.

[Airhead]

Dohh yes that all seemed a bit rough arsed to me so i did mine in a more sypathetic way, like some YZ's were. see post #64 here

[spurs59]

Ah you mean that modification, well the few people who I know to have done it with their DT's have noticed little, if any difference to their bikes, so I left mine alone, although I did change the reed petals from fibre glass ones to carbon fibre, and noticed there was an added "crispness" to the throttle.

did you have re-jet after fitting the carbon fibre reed petals and do you have a link to them