Hi

De-restricted my air filter and drilled my backplate, I need to up my main jet a bit now.

Most people are saying go from 76.5 to 90+ sizes, aint this a big leap?

I will probably get a few, but need to know the thread size of the jets, as I have no idea what the carb is cant see it

Thanks

its running standard carb it will be a mikuni carb

you can buy mikuni main jets on e bay

i used a 95 in mine

have a look here he sells all different sizes

http://www.ebay.co.uk/itm/MIKUNI-Brass-Main-Jet-Jets-95-/190578939077?pt=UK_Motorcycle_Parts&hash=item2c5f63d4c5

Should be standard, cheers bud, what mods have you given yours? Same as mine?

carb is a mikuni BDS26, standard main jet size is 90, thread is 5mm, i thought they were 6mm diameter not 8mm

like this

http://www.ebay.co.u...=item43a6ea21a5

To get to the carb, I have to take off the tank, but the speed dial in on top and in the way, I have to remove rubber screws on it, how the hell do they come off??

Cheerz people, I may have to book this bike in a workshop.

providing they are original, push the centre pin in, pull the clip out, you can get to the bottom of the carb by removing all the air filter

I can only get to the outside of them, the cross is all I see, is that to be pushed in?

if they are crosshead plastic screws the originals have been replaced, just take the screw out and the plastic clip will pull out

Mine are different at the back, can only just see underneath.