Morpheuz Posted January 7, 2012 Posted January 7, 2012 Hi, I know this has been talked about before, and they are in short supply, but I have a Dragstar that runs off one carb to 2 cylinders. Its carb to head rubber that splits off into 2 has split in the middle, giving it a leak, it was ok for a bit but now wont even start, obvs I need a new rubber.. Question is, I've scowered the wasteland and Ive found some for the virago, but they aint that clear on what it will fit, so, will the viragos carb to head rubber fit the Dragstar? If so I'll be able to get my bike running Thanks in advance.
neversaydie Posted January 8, 2012 Posted January 8, 2012 Part No YA00198610, oemmotorparts.com, 122.48 euros
Morpheuz Posted January 8, 2012 Author Posted January 8, 2012 Thanks a lot, Ive already ordered one from a virago, it looks the same, if not I'll use this, thanks dude.
Moderator Airhead Posted January 8, 2012 Moderator Posted January 8, 2012 this one? http://www.ebay.co.uk/itm/BRAND-NEW-CARB-INTAKE-JOINT-MANIFOLD-YAMAHA-VIRAGO-XV-250-/250899601333?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D330580120886%252B330580120886%26po%3D%26ps%3D63%26clkid%3D5473958531768767659
Morpheuz Posted January 9, 2012 Author Posted January 9, 2012 Cant believe that.... I searched everywhere, ebay included, and couldn't find it, I managed to find a virago one off bitzforbikez, same as that only 30 quid dearer
Recommended Posts